Tuesday, June 29, 2010

Just a quick post to show you a new listing in my shop.

This is similar to another bracelet I had in my shop.  I was going to "discontinue" it, but I had a special request from someone.  So I went ahead and made two:  one for her and one for my shop.  (Oh, and then I went ahead and made another one in copper!)

I'm making an attempt to be better in creating some of my jewelry in multiples.

For example, it used to be that I would only make a single pair of earrings.  "Why should I make more", I'd think.  "If I make several and they don't sell, the silver and gemstones will be a loss".

Now that I've established my shop and have a little more experience, I know that I should keep some items always in stock.  (Can't do that with those one-of-a-kind cabs though!  I think that's one of the reasons I love them.)

Right now my sales are a little slow, but that's usually the case in the summer months. (No, no, no, I'm not complaining.) Come December, I'll be rushing around trying to keep up with orders.  I know it's only June, but I want to promise myself to start preparing for Christmas.



-------------------------------------

Do you want to receive my blog by email? Click here!

Would you like to be a Contrariwise Follower and see what trouble I might be up to or what I'm working on? All you have to do is click on the link on the left in my side bar.

Monday, June 28, 2010

The Bloomington Gem, Mineral, & Fossil Show was HUGE.  3 buildings in the fairgrounds and overflow dealers outside.   I couldn't believe how big it was - but cab sellers were the minority. Tons of people were selling rock slabs and huge amounts of chunks of rock. Despite that, I think I did pretty well.

The only person I met from Etsy that I knew was GemCutter.  It was like meeting an old friend.  I got a chance to see his cabs in person and preview some that he'll have in his Etsy shop later this week. A few of the ones he was going to list went home with me.  (Do you see that huge plume agate and the large Bruno Jasper.  Sorry, they're never going to get listed in his shop as they're mine!)

I thought I bought quite a lot of cabs, but when I laid them out to photograph, it doesn't seem to look like much.  As you can see in the photo I  got some Atlantiscite, plume agates, bruno jasper, imperial jasper, turquoise, a boulder opal, and a bunch of other stuff.  (If you want to see individual photos of the cabs, go to my flickr site. )

It's so nice being able to see the cabs rather than buying them on line.  They look so different in person and you really know what you're getting.  I bought a couple new types that I'd never seen in person, the bruno jasper and the imperial jasper.  I'd never been impressed when I'd seen photos of them.  They looked pretty boring in photos so I never bought them.  But when I saw them in person - WOW!  Especially the Imperial Jasper - it has an amazing inner glow that is so difficult to capture.

It was hotter than heck and I was so exhausted when I got back home. ( I have no idea how the sellers can do it.)  But I'm already planning to go again next year.


-------------------------------------

Do you want to receive my blog by email? Click here!

Would you like to be a Contrariwise Follower and see what trouble I might be up to or what I'm working on? All you have to do is click on the link on the left in my side bar.

Friday, June 25, 2010

Guess where I'm going this weekend!

(Hmmm, that disclaimer on the page is a bit strange: "Not Responsible For Accidents".  What kind of accidents do you think they've had?  Lapidary artists engaging in fisticuffs in the parking lot?)

I was told this one is the biggest in the Midwest.  I can't wait!  I hope to have some swag to show you when I get back.

-------------------------------------

Do you want to receive my blog by email? Click here!

Would you like to be a Contrariwise Follower and see what trouble I might be up to or what I'm working on? All you have to do is click on the link on the left in my side bar.

Thursday, June 24, 2010

After having worked on an elaborate turquoise necklace, I felt the need to go minimalistic. So I put together this sweet little pendant. It's a lovely nugget of turquoise that I purchased long ago.   It's been waiting patiently in my bead box for far too long. Perhaps it can find an owner and finally feel loved.

Summer has really taken a bite out of my hours on the workbench. I used to have time in the evenings when my daughter was busy with her gymnastics, but during the summer she practices during the day when I’m at my full-time (non-jewelry making, corporate America) job. Plus my older daughter is back home from college and they both want attention from me when I get home from work.

Not only do the kids want attention, but my yard needs attention! Spring and summer is when I make my pathetic attempts at gardening. This year I’ve sworn to get the back yard in shape (I’m sure my husband is laughing as he reads this) although I doubt that I’ll be able to tackle my side yard. (Only one side of the house per year.  Neither my attention span nor my gardening abilities will allow for more!)

And, of course, there is the temptation to just enjoy the summertime. I was definitely doing some of that, this past weekend.  We have an artsy area of town and I was there checking out these  cute little shops that sell hand-crafted jewelry. And there were so many lovely pieces!

One of the shops I visited had some bezel-set pendants under the counter. There were ocean jaspers, laradorites, moonstones, and others. I thought the quality of the cabochons was pretty poor. (Not to brag, but the ones I've acquired put them to shame.)

I asked to see the pendants because I was curious about the prices.  I like to think that someday in the future I might try to market my work to some boutiques and I wanted to check out the potential competition.

Now the cabs were simply set in bezels - I like to think that I put some effort into customizing each setting to bring out the best in each cab.  Still,  when I saw the prices of the pendants I was a little disturbed. They were priced at almost half of what I would charge for my bezel-set cabs!

All were made in Indonesia.  Considering that the shop’s mark-up must be twice of what they paid for the pendants, and that the distributor was making a profit as well as the original shop, I can’t imagine how little the workers must be paid - although it's so likely that the wages they're receiving in Indonesia, although so minimal, are probably crucial to their families' well being and survival.

Right now, based on the cost of materials, equipment, and the amount I pay for taxes, I'm pretty much breaking even.  I can't imagine selling my works to a boutique/shop for 50% of what I charge on Etsy.  Nor can I imagine increasing my prices on Etsy just so that I can reasonably sell to a shop.

I guess I'll just continue to be an independent artist on Etsy for a while longer.


(Sorry for the rambling post.)


---------------------------

Do you want to receive my blog by email? Click here!

Would you like to be a Contrariwise Follower and see what trouble I might be up to or what I'm working on? All you have to do is click on the link on the left in my side bar.

Wednesday, June 23, 2010

 Just finished this necklace this weekend.  (I blogged about this necklace earlier, here and here. )

The centerpiece is a huge Sleeping Beauty turquoise.  It's a beautiful solid blue.  The setting has vines set asymmetrically on one side. Similar vines have been cut out on the back, allowing the blue turquoise to peek through.

The chain has silver and turquoise beads - one set dangles in the back from the clasp and the other set is to one side of the pendant.

This took me too long to make. I kept fiddling with the design and it took me a while to get the bail just right so that the pendant would hang correctly at the neck, without tilting. There is a lot of heavy silver in this one, and the amount of silver in the design on the left made the pendant want to tilt.  But I did get it finally get it right.

The person who originally commissioned this pendant decided not to purchase this piece. The silverwork on it was bigger than she expected.  So you'll be able to find it listed in my Etsy shop.




---------------------------

Do you want to receive my blog by email? Click here!

Would you like to be a Contrariwise Follower and see what trouble I might be up to or what I'm working on? All you have to do is click on the link on the left in my side bar.

Monday, June 21, 2010

MooShu is quite good at fetch. In fact, he's better than any other dog I ever had, even dogs with retriever blood in them!

He has a tiny little tennis ball and, after fetching it, lays it down at my feet to throw it again. If I don't pick it up, he'll pick it up and toss it at me. Slowly he learned that picking something up and tossing it can be a game he can play by himself.

So here's MooShu with an acorn that turns out to make a very nice substitute for a discus.




(Oh, and if you look carefully, you'll see the absolute first appearance of Contrariwise (me!) in this blog.)




---------------------------

Do you want to receive my blog by email? Click here!

Would you like to be a Contrariwise Follower and see what MooShu might be up to or what I'm working on? All you have to do is click on the link on the left in my side bar.

Friday, June 18, 2010

I saw this headline on Drudge yesterday:




Intriguing.  But it couldn't possibly be real heads, could it?  I just had to find out.  So I clicked on the link and the following article came up:





But what the heck is that photo in the lower left????!!!   
















Could it be?????








ARGHHHHH! 





Thursday, June 17, 2010

I’ve been working on the pendant for the past couple weeks. It should have taken me much less time, but I’ve had some problems.

1.  It took me forever to get the bail into a graceful shape that approximates the vines in the rest of the design. Every time I would get the front part right, the back of the bail didn't sit in the right position. But worse still, once I finally got the bail on, the chain wouldn’t balance properly, making the cab look tilted. So I had to “unsolder” the bail and make a new one.

Twice.

(After ruining 5 bails, I’ll know better in the future.)

2.  I also learned that an adjustable chain should not be directly attached to a necklace if you want it to hang straight. (It hangs straight at 18 inches, but is off-center when the chain adjusted to any other length.) So I had to add a jump ring to the bail and string the chain thought it, so that the pendant can move freely.
And then I didn’t have any beads for accents that were the right color. So I made a special trip to a bead shop and bought 2 beads. Just 2 beads. (I spent more on gas to get to the shop than I spent on the beads.)

3.  Thank goodness there’s one mistake I didn’t make. I remembered to oxidize the silver before the turquoise cab is in the setting. (And, oh yes, I learned this the hard way. Most stones aren't stained by the oxidizing solution. Most. Not turquoise.)

It's late now.  I know enough not to work on a piece when I'm tired. Otherwise I'd do a little more fininshing of the sterling,  set the cab, and finally be done!

And now for something that went right – despite me!

This was a custom ring. The buyer purchased this mookaite cab and I worked with her to design the ring. The buyer really wanted the little hemispheres I used in another piece, my Dark Side of the Moon ring, and wanted to incorporate them in her ring.

To be honest, this was not at all the way I envisioned setting the ring. Never in a million years would I have thought of adding those little spheres on either side. But it works!

And right now, it's on the way to the buyer. (I hope she likes it.)



---------------------------

Do you want to receive my blog by email? Click here!

Would you like to be a Contrariwise Follower and see what trouble I might be up to or what I'm working on? All you have to do is click on the link on the left in my side bar.

Wednesday, June 16, 2010

I think these are amongst the best cabs in my collection.  Each is so unique and would make an incredible ring or pendant.

I'm offering these for custom designs.  They'll be listed in my shop on Wednesday.

1. Amethyst Sage. I love this stone and  can't seem to pass them up.  This cabochon contains both purple agate and feathery plumes with gold highlights in a lovely assymetrical shape. Size: 25 x 30 mm

2. Galah porcelain agate. This is a very special agate from Agate creek in North Queensland Australia. The pink color combined with the banded patterns is so beautiful. (Collected 15 years ago by a well known opal and agate seller from Queensland Australia.) Size: 20 x 22mm

3. Blue Moss Agate - This Blue Moss is features blue and black mossy inclusions in a clear/milky white agate base.  An exquisite cab. Size: 17 x 15mm

4. Morrisonite Jasper. UPDATE 6/17/2010:  this one is now sold.  It's been replaced with a bright yellow and red Mookaite in my Etsy listing

5. Ocean Jasper. (One of my favorite stones) Here's a striking and unusual green and white Ocean Jasper cab with green orbs outlined by a white lacy halo. It also features a milky white agate covered druzy pocket. So icy. Size: 27 x 18mm

 ALSO, tomorrow I'm planning to post some things I've been working on.  One is a finished ring and the other is a work in progress.  (Yes, that turquoise pendant.  It's been giving me all sorts of headaches, but I think it's finally coming along.  It's been quite a learning experience for me.)


---------------------------

Do you want to receive my blog by email? Click here!

Would you like to be a Contrariwise Follower and see what trouble I might be up to or what I'm working on? All you have to do is click on the link on the left in my side bar.

Sunday, June 13, 2010

I just finished a few custom orders and have almost caught up with everything in my shop.  The "Design your Own Ring/Pendant" listing in my shop was so successful that I had to stop taking custom orders for a while, but now I'm ready again.

I'm planning to list these in my Etsy shop on Monday.  They're all cabs in sizes suitable for pendants or, in a couple cases, large cocktail rings.

I tried to get a good mix of different stones and these are amongst the favorites in my collection.  They are, from top to right:

1. A frosty colorless agate with green orbs.   Some of the orbs have orange centers. Size: 33mm X 22mm

2. A Tiffany Stone (Bertrandite) in cream and golden browns with some picturesque dendrites. Not your usual purple Tiffany Stone. 40 x 24mm

3  A bright pink Rhodonite from Nevada.  Super color on this one.  Often seen in the lighter rose color, this one is a bright, bright pink. 27x37mm.


4. A Tiffany Stone  with "chicken track" dendrites. The color of this cab ranges from light lavender to a deep bluish purple.  40 x 24 

5.  (Best for last?)  I've been saving this one.  A Graveyard Point Plume Agate with Druzy from Oregon.  The druzy is out standing in this cab!  50 X 25 mm.

---------------------------

Do you want to receive my blog by email? Click here!

Would you like to be a Contrariwise Follower and see what trouble I might be up to or what I'm working on? All you have to do is click on the link on the left in my side bar.

Tuesday, June 8, 2010

Just a quick post to show you a custom pendant I've been working on.

It's still very rough, so please don't mind the unsanded edges and the lack of finish.   But here it is, warts and all!  I'll be working on it some more over the next couple of days and I PROMISE it'll look better.

The buyer and I started this custom piece by scouring the internet looking for a large Sleeping Beauty cab.  Finding such a nice clear blue stone without much matrix was a bit more difficult than I imagined, but we finally found two that were very close to what she wanted.  I bought both and planned to return the one she didn't want, but it was so nice that I couldn't stand to part with it.  (Can you believe that! )

She liked the designs of a couple of other of my pieces, an ocean jasper pendant and a cherry creek ring, so I started making some sketches.
What usually happens is that I make some sketches, the buyer decides which elements she likes, I make more sketches, and we come to an agreement on the design.

The first batch of sketches, which you see on the left, weren't quite what she had in mind, but that's quite alright. With her input, I got the design she wanted the next time around.

However, I'm definitely keeping these sketches for future projects and inspiration.  I really like a few of them.  In fact, can you see the middle drawing in the top row?  I've started making that setting already.  You know, I thought the poor turquoise cab that was rejected needed a home.

---------------------------

Do you want to receive my blog by email? Click here!

Would you like to be a Contrariwise Follower and see what trouble I might be up to or what I'm working on? All you have to do is click on the link on the left in my side bar.

Friday, June 4, 2010




Here's the ring:



And here's the original sketch I blogged about last week:



This ring was actually finished two days ago except that I discovered that I didn't have anything to antique it with.  My Liver of Sulfur was grey and dead - the summer humidity destroys it.   And I couldn't find a bottle of Silver Black that I just ordered.  So I decided to antique the ring the "old fashioned way" using eggs. 

Two days later the color wasn't what I wanted, so I went to an out-of-the-way, hole-in-the-wall rock shop, Jox Rox, and bought some fresh Liver of Sulfur to finish the ring. 

Oh, and this trip to the rock shop cost me BIG TIME. It turned out the shop had just gotten a shipment of Ocean Jasper, and I couldn't resist picking up some cabs. The prices were great so I bought way more than I should.  (Yes, I know.  I have a problem.  And admitting to it is the  first step to recovery.)

The ring got antiqued last night and it went out in the mail this morning.  

BUT I DIGRESS.  

I really liked the horizontal striations in the Tiger Iron cab, so I carried them forward in both the band and in the background behind the stone.  And I think the silver spheres are a good contrast to the horizontal lines of the ring - without them, the design would be a little dull.

When Hope picked out  this cab, I really wasn't convinced that it would make a good ring. I'm very happy to say that I was oh so wrong. 

Now let me give a big shout out to the lapidary artists who cut this cab:  AZ Blue Rockers.  They just started selling on Etsy and they've been wonderful to work with.  I'll be featuring more jewelry with cabs that I've purchased from them in the future.

---------------------------

Do you want to receive my blog by email? Click here!

Would you like to be a Contrariwise Follower and see what trouble I might be up to or what I'm working on? All you have to do is click on the link on the left in my side bar.

Thursday, June 3, 2010

After placing a "Pick your cabochon and design a ring/pendant"  listing in my Etsy shop last week, I got a few new commissions.  One of the commissions was to set a gorgeous deep-blue labradorite as a ring.  I worked on it over the weekend and had it almost completed - except for the last step, setting the cab into the ring.   

When setting stones, you need to make them fit tightly and make sure the bezel is the correct shape for the stone.  I always check the fit of the stone by laying a piece of dental floss over the bezel and inserting the stone over the floss.  The floss keeps the stone from becoming stuck in the bezel and makes it easy to pop out.

I placed the stone into the setting and the fit was good and tight.  Very tight.  I had to use the floss to get it out.  Out it popped, up into the air, and then downward, toward my hard concrete floor.

I didn't see it hit the floor but I heard it.  

It took me a few seconds to find it, and I had a bad feeling in my stomach while I was looking for it.

Yes, the unthinkable happened, what I always fear: the cab was broken.

Of course it's irreplaceable.  It's a designer cabochon and not a standard size. I felt absolutely horrible and sent a message to the buyer.  Luckily she was very understanding.

In the meantime, I have a lovely ring with an empty place where a cab should be. 

I hate melting it down, so I'm checking with lapidary artists to see about cutting a stone to fit the setting.


---------------------------

Do you want to receive my blog by email? Click here!

Would you like to be a Contrariwise Follower and see what trouble I might be up to or what I'm working on? All you have to do is click on the link on the left in my side bar.